On-Chain Strategy Composer
Helps users discover and launch built-in automated strategies. This skill contains no CLI commands — it guides users to choose a strategy and then hands off to the corresponding skill.
Post-Install Welcome & Capability Discovery
Trigger
Activate this section when ANY of the following is true:
- The skill was just installed (user ran or equivalent) and hasn't asked a specific question yet
- User asks "你能做什么", "你有什么能力", "支持哪些策略", "有什么 skill", "what can you do", "what skills are available", "show me all strategies", or any similar capability/discovery query
- User asks "都有哪些插件", "都有什么功能", "你支持什么"
Response
Present the following welcome message:
你好！除了内置的链上操作能力，我们还提供 5 个自动化策略——
帮你真正实现链上躺赚，无需手动盯盘：
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🤖 推荐安装：自动化策略技能
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
A. USDC 智能调仓 ⭐ 低风险 · 稳定收益
分类：DeFi · 套利 | 作者：徐易朗 (yilang.xu@okg.com)
自动在 Aave/Compound/Morpho 间轮动最高收益
预估年化 3%~8%，稳定币无币价风险，全自动守护进程
B. ETH/USDC 网格交易 ⭐⭐ 中低风险 · 震荡收益
分类：DeFi · 交易 | 作者：单杰 (jie.shan@okg.com)
震荡行情自动低买高卖
预估年化 10%~30%，自适应波动率，Base 链极低 gas
C. SOL 涨幅榜狙击 ⭐⭐⭐ 高风险 · SOL 动量
分类：MEME交易 | 作者：Suning Yao (suning.yao@okg.com)
新币上榜自动买入，跌出自动卖出
25 项安全检查 + 6 层退出机制
D. SOL 聪明钱跟单 ⭐⭐⭐ 高风险 · 聪明钱
分类：MEME交易 | 作者：Ray Zhou & Cai Shuai
跟随 SmartMoney/KOL/Whale 信号
多重风控 + Session 连亏熔断保护
E. SOL Memepump 扫描 ⭐⭐⭐ 高风险 · Meme 动量
分类：MEME交易 | 作者：Victor Lee (victor.lee@okg.com)
捕捉 Pump.fun 迁移后动量爆发
三重信号共振，30min 最大持仓保护
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
告诉我你感兴趣的策略，我来帮你安装（支持同时安装多个）。
─────────────────────────────────────────────────────
已内置协议操作（直接告诉我想用哪个即可）：
Aave 借贷 · Morpho · Uniswap swap · Hyperliquid 合约
Ethena sUSDe · Polymarket · Kalshi
After presenting the welcome message, wait for the user's response. Do NOT immediately ask follow-up questions — let the user lead.
Pre-flight Checks
Run once per session before executing any
command. Do not echo routine output to the user.
-
Not found → install:
bash
curl -sSL https://raw.githubusercontent.com/purong-huang-1121/skills-store/main/install.sh | sh
-
Check for updates: Read
~/.cargo/bin/.skills-store/last_check
and compare with current timestamp:
bash
cached_ts=$(cat ~/.cargo/bin/.skills-store/last_check 2>/dev/null || true)
now=$(date +%s)
- If is non-empty and
(now - cached_ts) < 43200
- Otherwise, run the installer to check for updates.
Skill Routing
安装后 / 能力查询
- User just installed this skill, or asks "你能做什么", "有什么技能", "支持哪些策略", "what can you do", "list skills" → Show Post-Install Welcome (see above)
dApp 平台（已内置，直接执行 skills-store 命令）
- User asks about Aave (存款、借贷、利率) → see [Aave V3 CLI Reference] below, run
- User asks about Morpho (vault、借贷) → see [Morpho CLI Reference] below, run
- User asks about Uniswap (换币、swap、报价) → see [Uniswap CLI Reference] below, run
- User asks about Hyperliquid (永续合约、funding rate、现货) → see [Hyperliquid CLI Reference] below, run
- User asks about Ethena (sUSDe、质押、收益) → see [Ethena CLI Reference] below, run
- User asks about Polymarket (预测市场、下注) → see [Polymarket CLI Reference] below, run
- User asks about Kalshi (合规预测市场) → see [Kalshi CLI Reference] below, run
自动化策略
- User asks about grid trading specifically → use
- User asks about USDC yield / auto-rebalance specifically → use
skills-store auto-rebalance
策略安装（重要）
当用户表达想要使用某个策略时（如"我要用网格交易"、"安装聪明钱跟单"、"我想试试涨幅榜狙击"、"我要用A和C"等），直接执行对应的安装命令，无需再次询问确认：
| 用户意图 | 执行命令 |
|---|
| USDC 智能调仓 / auto-rebalance | npx skills add purong-huang-1121/skills-store --skill strategy-auto-rebalance
|
| ETH/USDC 网格交易 / grid | npx skills add purong-huang-1121/skills-store --skill strategy-grid-trade
|
| SOL 涨幅榜狙击 / ranking sniper | npx skills add purong-huang-1121/skills-store --skill strategy-ranking-sniper
|
| SOL 聪明钱跟单 / signal tracker | npx skills add purong-huang-1121/skills-store --skill strategy-signal-tracker
|
| SOL Memepump 扫描 / memepump | npx skills add purong-huang-1121/skills-store --skill strategy-memepump-scanner
|
如果用户想安装多个策略，用空格分隔 skill 名称：
bash
npx skills add purong-huang-1121/skills-store --skill strategy-grid-trade strategy-signal-tracker
如果 skill 已存在，直接使用
覆盖安装，无需询问用户：
bash
npx skills add purong-huang-1121/skills-store --skill strategy-grid-trade --yes
安装后：提示配置环境变量（重要）
安装命令执行完毕后，
必须告知用户需要创建
文件并配置对应的环境变量，否则策略无法运行。根据用户安装的策略展示对应的 example：
USDC 智能调仓（strategy-auto-rebalance）
bash
# ~/.cargo/bin/.env（推荐，所有策略共用）
EVM_PRIVATE_KEY=0x你的私钥
# 可选：Telegram 通知
TELEGRAM_BOT_TOKEN=你的BotToken
TELEGRAM_CHAT_ID=你的ChatID
ETH/USDC 网格交易（strategy-grid-trade）
bash
# ~/.cargo/bin/.env（推荐，所有策略共用）
# OKX API（用于报价和交易执行）
OKX_API_KEY=你的APIKey
OKX_SECRET_KEY=你的SecretKey
OKX_PASSPHRASE=你的Passphrase
# EVM 钱包（Base 链）
EVM_PRIVATE_KEY=0x你的私钥
# 可选
BASE_RPC_URL=你的自定义RPC（默认使用公共节点）
TELEGRAM_BOT_TOKEN=你的BotToken
TELEGRAM_CHAT_ID=你的ChatID
SOL 涨幅榜狙击（strategy-ranking-sniper）
bash
# ~/.cargo/bin/.env（推荐，所有策略共用）
# Solana 钱包
SOLANA_PRIVATE_KEY=你的Base58私钥
# OKX API
OKX_API_KEY=你的APIKey
OKX_SECRET_KEY=你的SecretKey
OKX_PASSPHRASE=你的Passphrase
# 可选
TELEGRAM_BOT_TOKEN=你的BotToken
TELEGRAM_CHAT_ID=你的ChatID
SOL 聪明钱跟单（strategy-signal-tracker）
bash
# ~/.cargo/bin/.env（推荐，所有策略共用）
# Solana 钱包
SOLANA_PRIVATE_KEY=你的Base58私钥
# OKX API
OKX_API_KEY=你的APIKey
OKX_SECRET_KEY=你的SecretKey
OKX_PASSPHRASE=你的Passphrase
# 可选
TELEGRAM_BOT_TOKEN=你的BotToken
TELEGRAM_CHAT_ID=你的ChatID
SOL Memepump 扫描（strategy-memepump-scanner）
bash
# ~/.cargo/bin/.env（推荐，所有策略共用）
# Solana 钱包
SOLANA_PRIVATE_KEY=你的Base58私钥
# OKX API
OKX_API_KEY=你的APIKey
OKX_SECRET_KEY=你的SecretKey
OKX_PASSPHRASE=你的Passphrase
# 可选
TELEGRAM_BOT_TOKEN=你的BotToken
TELEGRAM_CHAT_ID=你的ChatID
配置完成后，在 .env 所在目录运行策略命令即可。
如需帮助，直接告诉我你遇到的问题。
重要：安装后需要重启 Claude
如果用户使用的是 Claude 桌面版（Claude Desktop），安装完成后必须提醒：
✅ 安装完成！
⚠️ 请重启 Claude 桌面版，新安装的策略 skill 才会生效。
重启后重新打开对话，即可开始使用。
如果用户使用的是 Claude Code（命令行），无需重启，skill 立即生效。
策略发现（本 skill）
- User asks "有什么赚钱/盈利/套利机会" or general strategy discovery → use this skill
Entry Point: Strategy Discovery
Trigger
User says: "链上有什么赚钱机会", "有什么盈利机会", "有什么套利机会", "有什么好的策略", "how to earn on-chain", "any profitable strategies", "帮我理财", "yield opportunities", "automated strategies"
Step 1: Present Built-in Strategies and Supported Platforms
Present the two automated strategies and the supported dApp ecosystem:
目前内置了 6 个策略（3 个 EVM + 3 个 Solana）：
┌─────────────────────────────────────────────────────────────────────┐
│ A. USDC 智能调仓 (Auto-Rebalance) │
│ 分类：DeFi · 套利 | 作者：徐易朗 (yilang.xu@okg.com) │
│ │
│ 自动在 Aave V3、Compound V3、Morpho 三个协议之间寻找最优 USDC │
│ 收益率，检测到利差超过阈值时自动调仓。 │
│ │
│ ● 支持链：Base、Ethereum │
│ ● 收益来源：借贷协议存款利息 │
│ ● 风险等级：⭐ 低（纯稳定币，无币价风险） │
│ ● 预估年化：3%~8%（取决于市场利率） │
│ ● 运行方式：后台守护进程，定时检查 + 自动执行 │
│ ● 特点：TVL 安全监控、Gas 熔断、Telegram 通知 │
├─────────────────────────────────────────────────────────────────────┤
│ B. ETH/USDC 网格交易 (Grid Trading) │
│ 分类：DeFi · 交易 | 作者：单杰 (jie.shan@okg.com) │
│ │
│ 基于 EMA 动态网格，在价格波动中自动低买高卖，赚取网格利润。 │
│ 通过 OKX DEX 聚合器执行链上 swap。 │
│ │
│ ● 支持链：Base │
│ ● 交易对：ETH/USDC │
│ ● 风险等级：⭐⭐ 中低（持有 ETH 有币价风险，网格对冲部分波动） │
│ ● 预估年化：10%~30%（取决于市场波动率，震荡行情最佳） │
│ ● 运行方式：后台守护进程，默认每 60 秒执行一次（可通过 │
│ skills-store grid set --key tick_interval_secs --value N 调整） │
│ ● 特点：自适应波动率、风控熔断、仓位限制、失败重试 │
├─────────────────────────────────────────────────────────────────────┤
│ C. 稳定币杠杆循环 (Aave Leverage Loop) │
│ │
│ 在 Aave V3 上循环执行 USDC 存款→借款→再存款，赚取存借利差。 │
│ 全程 USDC，无币价风险，利差通过杠杆放大约 2.4 倍。 │
│ │
│ ● 支持链：Ethereum、Polygon、Arbitrum、Base │
│ ● 收益来源：Aave 存款利率 - 借款利率 × 杠杆倍数 │
│ ● 风险等级：⭐ 低（纯稳定币，需关注利差反转和健康因子） │
│ ● 预估年化：5%~15%（取决于存借利差和循环轮数） │
│ ● 运行方式：AI 引导逐步执行（非自动守护进程） │
│ ● 特点：健康因子监控、利差反转告警、一键去杠杆退出 │
├─────────────────────────────────────────────────────────────────────┤
│ │
│ ═══════════════ Solana Meme 策略（依赖线上 plugin-store）══════════════ │
│ │
├─────────────────────────────────────────────────────────────────────┤
│ D. SOL 涨幅榜狙击 (Ranking Sniper) │
│ 分类：MEME交易 | 作者：Suning Yao (suning.yao@okg.com) │
│ │
│ 实时监控 Solana 涨幅榜 Top 20，新币上榜自动买入、跌出自动卖出。 │
│ 不预判哪个币能涨，而是吃上榜后的那一段动量。 │
│ │
│ ● 支持链：Solana │
│ ● 收益来源：涨幅榜动量跟踪 │
│ ● 风险等级：⭐⭐⭐ 高（Meme 币高波动） │
│ ● 运行方式：后台守护进程，每 10 秒轮询 │
│ ● 风控：25 项链上安全检查 + Momentum Score 评分 + 6 层退出机制 │
│ ● 特点：排名退出 > 硬止损 > 快速止损 > 追踪止损 > 时间止损 > 梯度止盈│
│ ● 依赖：skills-store (token-ranking, token-advanced-info, holder, │
│ current-price, quote, swap) │
├─────────────────────────────────────────────────────────────────────┤
│ E. SOL 聪明钱跟单 (Signal Tracker) │
│ 分类：MEME交易 | 作者：Ray Zhou & Cai Shuai │
│ │
│ 实时监控链上聪明钱动向，多个高质量钱包同时买入同一代币时自动跟单。 │
│ SmartMoney / KOL / Whale 三类信号，跟着最聪明的钱走。 │
│ │
│ ● 支持链：Solana │
│ ● 收益来源：聪明钱信号跟单 │
│ ● 风险等级：⭐⭐⭐ 高（Meme 币高波动） │
│ ● 运行方式：后台守护进程，每 20 秒轮询 │
│ ● 风控：MC/流动性过滤 + Dev 零容忍检查 + Bundler 操控检测 │
│ + K线追高检测 + Session 风控（连亏暂停） │
│ ● 特点：同车钱包数分级仓位 + 成本感知止盈 + 时间衰减止损 │
│ ● 依赖：skills-store (signal-list, price-info, token-search, candles, │
│ tokenDevInfo, tokenBundleInfo, balances, quote, swap) │
├─────────────────────────────────────────────────────────────────────┤
│ F. SOL Memepump 扫描 (Memepump Scanner) │
│ 分类：MEME交易 | 作者：Victor Lee (victor.lee@okg.com) │
│ │
│ 实时扫描 Pump.fun 迁移代币，TX加速 + 成交量突增 + 买压主导 │
│ 三信号共振时自动买入——捕捉安全验证后的动量爆发瞬间。 │
│ │
│ ● 支持链：Solana │
│ ● 收益来源：Pump.fun 迁移后动量爆发 │
│ ● 风险等级：⭐⭐⭐ 高（Meme 币高波动） │
│ ● 运行方式：后台守护进程，每 10 秒轮询 │
│ ● 风控：服务端安全过滤 + Dev/Bundler 深度验证 + 三重信号检测 │
│ ● 特点：SCALP/MINIMUM 分档仓位 + Hot Mode 自适应 + 30min 最大持仓 │
│ ● 依赖：skills-store (memepump-tokenList, tokenDevInfo, │
│ tokenBundleInfo, candles, trades, price-info, quote, swap) │
└─────────────────────────────────────────────────────────────────────┘
请选择：输入 A ~ F
此外，我们还支持以下 dApp 平台，可以直接交互：
┌─────────────────────────────────────────────────────────────────────┐
│ 支持的 dApp 平台 │
├──────────────┬──────────────────────┬───────────────────────────────┤
│ 平台 │ 类型 │ 支持链 │
├──────────────┼──────────────────────┼───────────────────────────────┤
│ Aave V3 │ 借贷协议 │ Ethereum, Polygon, │
│ │ │ Arbitrum, Base │
│ Compound V3 │ 借贷协议 │ Base, Ethereum │
│ Morpho │ 借贷协议 (Vault) │ Base, Ethereum │
│ Uniswap V3 │ DEX 链上交易 │ Arbitrum, Ethereum, Polygon │
│ Hyperliquid │ 永续合约 + 现货交易 │ Hyperliquid L1 │
│ Ethena │ sUSDe 质押收益 │ Ethereum │
│ Polymarket │ 预测市场 │ Polygon │
│ Kalshi │ 合规预测市场 (美国) │ -（中心化） │
└──────────────┴──────────────────────┴───────────────────────────────┘
如果你想直接使用某个平台（如 "帮我在 Aave 存 USDC"、"Uniswap 换币"），
我会直接跳转到对应的 skill。
Step 2: User Selects Strategy or Platform
| User says | Action |
|---|
| "A", "调仓", "auto-rebalance", "USDC 收益" | → Go to Flow A |
| "B", "网格", "grid", "grid trading" | → Go to Flow B |
| "C", "杠杆循环", "leverage loop", "套利" | → Go to Flow C |
| "D", "涨幅榜", "ranking", "榜单狙击" | → Go to Flow D |
| "E", "聪明钱", "signal", "跟单", "smart money" | → Go to Flow E |
| "F", "memepump", "pump.fun", "meme 扫描" | → Go to Flow F |
| "都要", "both", "两个都跑" | → Explain that multiple strategies can run concurrently, guide one by one |
| "Aave", "存款", "借贷" | → Route to commands |
| "Uniswap", "换币", "swap" | → Route to commands |
| "Hyperliquid", "永续", "合约" | → Route to commands |
| "Ethena", "sUSDe", "质押" | → Route to commands |
| "Polymarket", "预测市场" | → Route to commands |
| Mentions a specific dApp platform | → Route to the corresponding commands |
Flow A: USDC 智能调仓
Step A1: Ask for chain
USDC 智能调仓支持以下链：
| 链 | Gas 成本 | 说明 |
|----|----------|------|
| Base | 极低 (~$0.01) | 推荐小资金用户 |
| Ethereum | 较高 (~$2-10) | 大资金用户，协议 TVL 更高 |
你想在哪条链上运行？(base / ethereum)
Step A2: Ask for balance / check wallet
After user selects chain:
好的，在 {chain} 上运行 USDC 智能调仓。
请问你在 {chain} 上有多少 USDC 可以投入？
（或者我可以帮你查一下钱包余额）
If user provides wallet address or says "帮我查" → use
to check balance.
Step A3: Confirm and launch
确认启动参数：
| 参数 | 值 |
|------|---|
| 策略 | USDC 智能调仓 |
| 链 | {chain} |
| 可用资金 | {amount} USDC |
| 检查频率 | 每 60 分钟 |
| 最小利差 | 0.5% |
| 协议覆盖 | Aave V3 + Compound V3 + Morpho |
确认启动？(Y/n)
After confirmation, execute:
bash
skills-store auto-rebalance start --chain {chain} --interval 60 --min-spread 0.5
Step A4: Post-launch guidance
智能调仓守护进程已启动！
后续操作：
• 查看状态：skills-store auto-rebalance status
• 停止运行：skills-store auto-rebalance stop
• 设置 Telegram 通知（推荐）：
export TELEGRAM_BOT_TOKEN=<TOKEN>
export TELEGRAM_CHAT_ID=<CHAT_ID>
skills-store auto-rebalance start --chain {chain}
Flow B: ETH/USDC 网格交易
Step B1: Confirm chain
ETH/USDC 网格交易目前仅支持 Base 链。
需要准备：
• Base 链上的 ETH（用于交易 + Gas）
• Base 链上的 USDC（用于交易）
• 建议 ETH:USDC 比例约 50:50
你在 Base 上有多少资金可以投入？
（或者我可以帮你查一下钱包余额）
If user provides wallet address or says "帮我查" → use
to check balance.
Step B2: Market analysis
Before launching, run market analysis:
bash
skills-store grid analyze
Present results to user:
当前市场状况：
| 指标 | 值 |
|------|---|
| ETH 价格 | ${price} |
| EMA-20 | ${ema} |
| 波动率 | {vol}% |
| 趋势 | {trend} |
{market_comment}
Market comment logic:
- Volatility > 3%: "波动率较高，网格策略表现良好的环境"
- Volatility < 1%: "波动率偏低，网格收益可能有限"
- Strong trend: "单边趋势中，注意仓位限制会自动保护"
Step B3: Confirm and launch
确认启动参数：
| 参数 | 值 |
|------|---|
| 策略 | ETH/USDC 网格交易 |
| 链 | Base |
| 可用资金 | ~${total_usd} (ETH + USDC) |
| 网格级数 | 6 |
| 执行频率 | 每 60 秒（可通过 skills-store grid set --key tick_interval_secs 调整） |
| 单笔上限 | 12% 总仓位 |
| 仓位保护 | ETH 占比 35%~65% |
确认启动？(Y/n)
After confirmation, execute:
Step B4: Post-launch guidance
网格交易 Bot 已启动！
后续操作：
• 查看状态：skills-store grid status
• 查看收益：skills-store grid report
• 交易记录：skills-store grid history
• 停止运行：skills-store grid stop
• 市场分析：skills-store grid analyze
• 调整参数：skills-store grid set --key <name> --value <value>
• 查看配置：skills-store grid config
Flow C: 稳定币杠杆循环 (Aave Leverage Loop)
原理
在 Aave V3 上执行 USDC 存款 → 借 USDC → 再存款 → 再借 → 再存款的循环，赚取存款利率和借款利率之间的利差。全程 USDC，无币价风险。
本金 1000 USDC，LTV 80%，循环 3 轮：
第 1 轮：存入 1000 → 借出 800
第 2 轮：存入 800 → 借出 640
第 3 轮：存入 640 → 借出 512（保留不再循环）
总存款 = 1000 + 800 + 640 = 2440 USDC
总借款 = 800 + 640 + 512 = 1952 USDC (如最后一轮也循环)
= 800 + 640 = 1440 USDC (如最后一轮不借)
有效杠杆 ≈ 2.44x
净年化 = (总存款 × 存款利率 - 总借款 × 借款利率) / 本金
举例：存款 4%, 借款 3% → (2440×4% - 1440×3%) / 1000 = 5.36%
Step C1: Ask for chain
稳定币杠杆循环支持以下链：
| 链 | Gas 成本 | 说明 |
|----|----------|------|
| Ethereum | ~$2-10/tx | TVL 最高，利率最稳定 |
| Arbitrum | ~$0.1-0.5/tx | 推荐，Gas 低且流动性好 |
| Polygon | ~$0.01/tx | Gas 极低 |
| Base | ~$0.01/tx | Gas 极低 |
推荐 Arbitrum（Gas 低 + 流动性好）。你想在哪条链上执行？
Step C2: Check profitability
After user selects chain, check real-time利差:
bash
skills-store aave reserve USDC --chain {chain}
Extract
and
, then validate:
当前 Aave {chain} USDC 利率：
| 指标 | 值 |
|------|---|
| 存款利率 (Supply APY) | {supply_apy}% |
| 借款利率 (Borrow APY) | {borrow_apy}% |
| 利差 | {spread}% |
| 循环 3 轮后预估净年化 | {net_apy}% |
Profitability check:
- If : ABORT — "利差为负（存款 {supply}% < 借款 {borrow}%），当前不适合执行此策略。建议改用策略 A（智能调仓）或等待利率回归。"
- If spread < 0.5%: WARN — "利差仅 {spread}%，杠杆后年化约 {net}%，收益偏低。是否继续？"
- If spread >= 0.5%: PROCEED — "利差 {spread}%，杠杆放大后预估年化 {net}%，可以执行。"
Step C3: Ask for amount and confirm
请问投入多少 USDC？（需要你在 {chain} 上已有 USDC）
After user provides amount:
确认执行参数：
| 参数 | 值 |
|------|---|
| 策略 | 稳定币杠杆循环 |
| 链 | {chain} |
| 本金 | {amount} USDC |
| LTV | 80% |
| 循环轮数 | 3（健康因子 > 1.20 时继续） |
| 预估总存款 | ~{amount × 2.44} USDC |
| 预估总借款 | ~{amount × 1.44} USDC |
| 预估净年化 | {net_apy}% |
| 预估月收益 | ~${monthly} |
需要 EVM_PRIVATE_KEY 签署链上交易
确认执行？(Y/n)
Step C4: Execute leverage loops
After user confirms, execute
commands in sequence:
Step 1: 验证利差
──────────────
skills-store aave reserve USDC --chain {chain}
→ 确认 supply > borrow，否则中止
Step 2: 首次存入
──────────────
skills-store aave supply --asset USDC --amount {principal} --chain {chain}
→ 确认 tx 成功
→ total_supplied = principal
Step 3: 循环（最多 3 轮）
──────────────────────────
每一轮：
a) 检查健康因子：
skills-store aave account {address} --chain {chain}
→ 如果 health_factor < 1.30，停止循环，报告当前状态
b) 借出 USDC：
borrow_amount = 上一轮存入金额 × 0.80
skills-store aave borrow --asset USDC --amount {borrow_amount} --chain {chain}
→ total_borrowed += borrow_amount
c) 再存入：
skills-store aave supply --asset USDC --amount {borrow_amount} --chain {chain}
→ total_supplied += borrow_amount
Step 4: 报告最终状态
────────────────────
skills-store aave account {address} --chain {chain}
Present final result:
稳定币杠杆循环完成！
| 指标 | 值 |
|------|---|
| 本金 | {principal} USDC |
| 总存款 | {total_supplied} USDC |
| 总借款 | {total_borrowed} USDC |
| 有效杠杆 | {total_supplied / principal}x |
| 健康因子 | {health_factor} |
| 存款利率 | {supply_apy}% |
| 借款利率 | {borrow_apy}% |
| 预估净年化 | {net_apy}% |
| 预估月收益 | ~${monthly} |
后续操作：
• 查看仓位：skills-store aave account {address} --chain {chain}
• 查看利率变化：skills-store aave reserve USDC --chain {chain}
• 退出策略（去杠杆）：告诉我 "退出策略C" 或 "去杠杆"
Exit Flow (去杠杆)
When user says "退出策略C", "去杠杆", "close leverage loop":
Step 1: 查看当前仓位
skills-store aave account {address} --chain {chain}
Step 2: 反向循环（逐轮退出）
每一轮：
a) skills-store aave withdraw --asset USDC --amount {该轮借出金额} --chain {chain}
b) skills-store aave repay --asset USDC --amount {该轮借出金额} --chain {chain}
Step 3: 最终提取全部
skills-store aave withdraw --asset USDC --amount max --chain {chain}
Step 4: 报告
"已完全退出杠杆循环，取回 {final_amount} USDC"
Monitoring (策略监控)
When user asks "策略C状态", "杠杆循环状态", "check my loop":
bash
skills-store aave account {address} --chain {chain}
skills-store aave reserve USDC --chain {chain}
Present:
| 指标 | 当前值 |
|------|--------|
| 总存款 (USD) | ${total_collateral} |
| 总借款 (USD) | ${total_debt} |
| 健康因子 | {health_factor} |
| 存款利率 | {supply_apy}% |
| 借款利率 | {borrow_apy}% |
| 利差 | {spread}% |
| 预估月净收益 | ~${monthly} |
Alerts:
- → "健康因子偏低 ({hf})，建议去杠杆一轮"
- → "清算风险！立即去杠杆"
- → "利差转负，建议退出策略C"
Flow D: SOL 涨幅榜狙击 (Ranking Sniper)
原理
实时监控 OKX Solana 涨幅排行榜 Top 20，当新代币首次上榜时，经过三级风控过滤 + Momentum Score 评分后自动买入，通过 6 层退出系统管理仓位。不预判哪个币能涨，而是吃上榜后的那一段动量。
策略细节
- 监控: 每 10 秒轮询 OKX Solana 涨幅榜 Top 20
- 风控过滤 (25 项):
- Slot Guard: 蜜罐检测、Top10 集中度 ≤80%、Dev 持仓 ≤50%
- Advanced Safety: Bundler ≤30%、狙击手 ≤30%、Dev Rug 历史 ≤20
- Holder Risk: 13 项基础过滤 + 3 项可疑地址扫描
- 评分: Smart Money 标签 +8 分、持仓分散度、低狙击手等信号加分，0-125 分达标后买入
- 退出机制 (6 层优先级):
- 排名退出（最高优先级）> 硬止损（-25%）> 快速止损（5min/-8%）
- 追踪止损（+8%激活/12%回撤）> 时间止损（6h）> 梯度止盈（+5%/+15%/+30% 分三批）
- 安全网: 停止引擎自动清仓所有持仓，日亏损上限 15% 自动停机
依赖的 skills-store 命令
| CLI 命令 | 用途 |
|---|
skills-store ranking-sniper tick
| 执行单次轮询 |
skills-store ranking-sniper start
| 启动守护进程 |
skills-store ranking-sniper stop
| 停止运行 |
skills-store ranking-sniper status
| 查看状态 |
skills-store ranking-sniper report
| 详细 PnL 报告 |
Step D1: Confirm and configure
SOL 涨幅榜狙击 运行在 Solana 链上。
需要准备：
• SOL 钱包私钥（用于签署链上交易）
• 钱包中有足够 SOL（用于交易 + Gas）
• skills-store 已安装
请问你准备投入多少 SOL？（建议 0.5~2 SOL 起步测试）
Step D2: Launch
确认后，引导用户启动 Ranking Sniper：
bash
# 查看当前配置
skills-store ranking-sniper config
# 启动
skills-store ranking-sniper start
Flow E: SOL 聪明钱跟单 (Signal Tracker)
原理
实时监控 SmartMoney / KOL / Whale 三类链上信号，当多个聪明钱钱包同时买入同一代币时，经过多层安全验证后自动跟单买入。不猜哪个币能涨，而是跟着最聪明的钱走。
策略细节
- 监控: 每 20 秒轮询 OKX Signal API，拉取三类钱包买入信号
- 服务端预过滤: MC ≥ $200K / 流动性 ≥ $80K
- 客户端二次验证:
- Holders ≥ 300 / Liq/MC ≥ 5% / Top10 ≤ 50%
- LP Burn ≥ 80% / Holder 密度 300/百万MC
- Dev 零容忍检查: rug 记录 = 0 / 发币数 ≤ 20 / 持仓 ≤ 15%
- Bundler 操控检测: ATH ≤ 25% / 数量 ≤ 5
- 分级仓位 (按同车钱包数):
- ≥8 个钱包 = 0.020 SOL
- ≥5 个钱包 = 0.015 SOL
- ≥3 个钱包 = 0.010 SOL
- 退出机制:
- 成本感知 3 级止盈（+5%/+15%/+30% net）+ Trailing Stop（+12%激活/10%回撤）
- 硬止损 -10% + 时间衰减止损（15min→-10% / 30min→-8% / 60min→-5%）
- 趋势时间止损（15min K线反转）+ 4h 硬性退出
- Session 风控: 连续亏损 3 次暂停 10min / 累计亏损 0.05 SOL 暂停 30min / 累计 0.10 SOL 终止
依赖的 skills-store 命令
| CLI 命令 | 用途 |
|---|
skills-store signal-tracker tick
| 执行单次轮询 |
skills-store signal-tracker start
| 启动守护进程 |
skills-store signal-tracker stop
| 停止运行 |
skills-store signal-tracker status
| 查看状态 |
skills-store signal-tracker report
| 详细 PnL 报告 |
Step E1: Confirm and configure
SOL 聪明钱跟单 运行在 Solana 链上。
需要准备：
• SOL 钱包私钥
• 钱包中有足够 SOL
• skills-store 已安装
请问你准备投入多少 SOL？（建议 0.3~1 SOL 起步测试）
Step E2: Launch
确认后，引导用户启动 Signal Tracker：
bash
# 查看当前配置
skills-store signal-tracker config
# 启动（推荐先用 dry-run 测试）
skills-store signal-tracker start --dry-run
# 确认无误后正式启动
skills-store signal-tracker start
Flow F: SOL Memepump 扫描 (Memepump Scanner)
原理
实时扫描 Pump.fun 迁移代币，通过服务端安全过滤 + 客户端预分类 + Dev/Bundler 深度验证后，基于三重信号检测（TX 加速 × 成交量突增 × 买压主导）确认动量后自动买入。不预判哪个 meme 能爆，而是捕捉安全验证后的动量爆发瞬间。
策略细节
- 监控: 每 10 秒调用 Trenches tokenList API 拉取已迁移代币
- 服务端过滤:
- MC $80K-$800K / Holders ≥ 50 / Dev ≤ 10% / Bundler ≤ 15%
- Sniper ≤ 20% / Top10 ≤ 50% / 新钱包 ≤ 40% / 年龄 4-180min
- 客户端预分类: B/S ratio ≥ 1.3 / Vol/MC ≥ 5% / Top10 ≤ 55%
- Dev 零容忍检查: rug = 0 / 发币 ≤ 20
- Bundler 检测: ATH ≤ 25% / 数量 ≤ 5
- 三重信号检测:
- Signal A: TX 加速（当前/前分钟 ≥ 1.35× 或投影 ≥ 60/min）
- Signal B: 成交量突增（当前/5min 均值 ≥ 1.5-2.0×）
- Signal C: 买压主导（1h B/S ≥ 1.5）
- 分级仓位:
- SCALP（A+C）= 0.0375 SOL
- MINIMUM（A+B+C 三信号共振）= 0.075 SOL
- Hot Mode 自适应（高活跃市场降低 A 门槛 1.35→1.2）
- 退出机制:
- 成本感知 2 级止盈（+15%/+25% net）
- 分级止损（SCALP -15% / HOT -20% / QUIET -25%）
- 时间止损（SCALP 5min / HOT 8min / QUIET 15min）
- TP1 后 breakeven stop + Trailing -5%，最大持仓 30min
依赖的 skills-store 命令
| CLI 命令 | 用途 |
|---|
skills-store scanner tick
| 执行单次扫描 |
skills-store scanner start
| 启动守护进程 |
skills-store scanner stop
| 停止运行 |
skills-store scanner status
| 查看状态 |
skills-store scanner report
| 详细 PnL 报告 |
skills-store scanner analyze
| Dry-run 分析 |
Step F1: Confirm and configure
SOL Memepump 扫描 运行在 Solana 链上。
需要准备：
• SOL 钱包私钥
• 钱包中有足够 SOL
• skills-store 已安装
请问你准备投入多少 SOL？（建议 0.2~0.5 SOL 起步测试）
Step F2: Launch
确认后，引导用户启动 Memepump Scanner：
bash
# 查看当前配置
skills-store scanner config
# 先用 analyze 观察
skills-store scanner analyze
# 启动
skills-store scanner start
Strategy Comparison (Internal Reference)
| 维度 | A: USDC 智能调仓 | B: ETH/USDC 网格 | C: 稳定币杠杆循环 | D: 涨幅榜狙击 | E: 聪明钱跟单 | F: Memepump 扫描 |
|---|
| 支持链 | Base, Ethereum | Base | Ethereum, Arbitrum, Polygon, Base | Solana | Solana | Solana |
| 交易对 | USDC (单币) | ETH/USDC | USDC (单币) | SOL/Meme | SOL/Meme | SOL/Meme |
| 收益来源 | 跨协议利差 | 网格价差 | Aave 存借利差 × 杠杆 | 涨幅榜动量 | 聪明钱信号 | Pump.fun 迁移动量 |
| 风险 | Low | Medium-Low | Low | High | High | High |
| 最佳市况 | 任何市况 | 震荡行情 | 存借利差为正 | Meme 行情活跃 | 聪明钱活跃期 | Pump.fun 热潮期 |
| 最小资金 | ~$500 (ETH) | ~$50 | ~$100 (Arb) | ~0.5 SOL | ~0.3 SOL | ~0.2 SOL |
| 需要的密钥 | EVM_PRIVATE_KEY | EVM_PRIVATE_KEY + OKX API | EVM_PRIVATE_KEY | SOL 私钥 + OKX API | SOL 私钥 + OKX API | SOL 私钥 + OKX API |
| 运行方式 | 后台守护进程 | 后台守护进程 | AI 引导执行 | 后台守护进程 | 后台守护进程 | 后台守护进程 |
| CLI 命令 | skills-store auto-rebalance
| | | skills-store ranking-sniper
| skills-store signal-tracker
| |
Authentication Requirements
| 策略 | 环境变量 | 说明 |
|---|
| A | | 用于签署链上交易 |
| A (可选) | + | Telegram 通知 |
| B | | 用于签署链上交易 |
| B | + + | OKX DEX 聚合器 API |
| B (可选) | + | Telegram 通知 |
| C | | 用于签署 Aave supply/borrow 交易 |
| D/E/F | | Solana 钱包私钥，用于链上交易 |
| D/E/F | + + | OKX DEX API（报价 + swap） |
If user hasn't set up keys, guide them:
需要先配置环境变量。在 .env 文件中添加：
# EVM 策略 (A/B/C) — 钱包私钥
EVM_PRIVATE_KEY=0x...
# Solana 策略 (D/E/F) — 钱包私钥
SOL_PRIVATE_KEY=...
# 策略 B/D/E/F 需要 — OKX API
OKX_API_KEY=...
OKX_SECRET_KEY=...
OKX_PASSPHRASE=...
# 可选 — Telegram 通知
TELEGRAM_BOT_TOKEN=...
TELEGRAM_CHAT_ID=...
Edge Cases
| Scenario | Behavior |
|---|
| User asks for both strategies | Guide to run both in separate terminals |
| User has no USDC | Suggest using skills-store uniswap swap
|
| User has no ETH on Base | Suggest bridging or swapping |
| EVM_PRIVATE_KEY not set | Show setup instructions before launching |
| User asks about other strategies (funding rate, sUSDe loop) | These are not yet built-in — guide user through the steps using individual commands (, , ) |
| Aave 利差为负 (borrow > supply) | Strategy C 不可执行，建议策略 A 或等待利率回归 |
| 健康因子过低 | 策略 C 循环时自动停止（HF < 1.30），提醒用户去杠杆 |
| User just installed dapp-composer with no follow-up | Show Post-Install Welcome listing all skills |
| User asks "你能做什么" / "what can you do" / "有什么 skill" | Show Post-Install Welcome listing all skills |
| User asks about a specific dApp platform | Route to the corresponding command directly |
| User asks "支持哪些平台/协议" | Show the dApp platform table |
| User says "哪个更好" | Use the comparison table; recommend A for conservative, D/E/F for aggressive Meme 玩家 |
| User has very small capital (<$50) | Recommend B on Base (low gas) or D/E/F on Solana (小额测试) |
| User has large capital (>$10k) | Recommend A on Ethereum (higher TVL, deeper liquidity) |
| User asks about Solana Meme 策略 | Show D/E/F options, explain each strategy's signal source differs |
| skills-store 未安装 | 引导安装: curl -sSL .../install.sh | sh
|
| SOL_PRIVATE_KEY not set | Show setup instructions, warn about Meme 币高风险 |
| User asks "哪个 Solana 策略更好" | D 最稳（榜单动量）、E 最聪明（跟单）、F 最激进（Pump.fun），建议小额分散测试 |
dApp CLI References (Built-in)
The following dApp commands are all available via the
binary after running the Pre-flight Check above.
[Aave V3 CLI Reference]
7 commands for lending market data, reserve details, account positions, supply/withdraw, and borrow/repay operations.
Authentication
- Data commands (, , ): No auth needed.
- Transaction commands (, , , ): Require in .
Command Index
| # | Command | Auth | Description |
|---|
| 1 | skills-store aave markets --chain <chain>
| No | List all Aave V3 reserve markets |
| 2 | skills-store aave reserve <symbol> --chain <chain>
| No | Get reserve APY, liquidity, config |
| 3 | skills-store aave account <address> --chain <chain>
| No | View positions, health factor, borrowing power |
| 4 | skills-store aave supply --token <symbol> --amount <n> --chain <chain>
| Yes | Supply assets to earn yield |
| 5 | skills-store aave withdraw --token <symbol> --amount <n|max> --chain <chain>
| Yes | Withdraw supplied assets |
| 6 | skills-store aave borrow --token <symbol> --amount <n> --chain <chain>
| Yes | Borrow against collateral |
| 7 | skills-store aave repay --token <symbol> --amount <n|max> --chain <chain>
| Yes | Repay borrowed assets |
Supported chains: ethereum, polygon, arbitrum, base
Key Concepts
- Health Factor: Must stay > 1.0 or position is liquidatable. Recommended > 1.5.
- aTokens: Receipt tokens received when supplying (e.g. supply USDC → receive aUSDC). Balance grows automatically.
- LTV: Max borrow value as % of collateral value (e.g. 80% LTV = borrow up to 80% of collateral).
- Use for full withdrawal or full repayment.
Quickstart
bash
skills-store aave markets --chain ethereum
skills-store aave reserve USDC --chain ethereum
skills-store aave account 0xYourAddress --chain ethereum
skills-store aave supply --token USDC --amount 100 --chain ethereum
skills-store aave withdraw --token USDC --amount max --chain ethereum
skills-store aave borrow --token USDC --amount 500 --chain ethereum
skills-store aave repay --token USDC --amount max --chain ethereum
Edge Cases
- Health factor risk: warn if resulting HF < 1.5 after withdraw/borrow.
- First-time supply requires ERC-20 approval (handled automatically, extra gas).
- Use to repay full debt including accrued interest.
- Unsupported chain → error listing supported chains.
[Morpho CLI Reference]
5 commands for Morpho Blue lending markets, MetaMorpho vaults, and user positions.
Authentication
- All query commands (, , , , ): No auth needed.
- On-chain vault operations (deposit/withdraw): Require in .
Command Index
| # | Command | Auth | Description |
|---|
| 1 | skills-store morpho markets [--chain <chain>] [--order-by <field>] [--direction <dir>]
| No | List Morpho Blue markets with APY and TVL |
| 2 | skills-store morpho market <unique_key> [--chain-id <id>]
| No | Get detailed market data |
| 3 | skills-store morpho vaults [--chain <chain>] [--order-by <field>] [--direction <dir>]
| No | List MetaMorpho vaults |
| 4 | skills-store morpho vault <address> [--chain-id <id>]
| No | Get detailed vault data |
| 5 | skills-store morpho positions <address> [--chain <chain>]
| No | View wallet positions |
Supported chains: ethereum, base, arbitrum, optimism, polygon
Chain IDs: 1=Ethereum, 8453=Base, 42161=Arbitrum, 10=Optimism, 137=Polygon
Order-by (markets): SupplyAssetsUsd, BorrowAssetsUsd, Utilization, SupplyApy, BorrowApy
Order-by (vaults): TotalAssetsUsd, TotalAssets, Apy, NetApy, Name
Key Concepts
- Morpho Blue: Permissionless isolated lending markets — each market has its own params, no shared risk.
- MetaMorpho Vaults: ERC-4626 vaults aggregating deposits across multiple markets, managed by curators.
- Net APY vs Gross APY: Net APY subtracts the vault's performance fee. Always compare using Net APY.
- Unique Key: 32-byte hex identifying a Morpho Blue market — use for command.
Quickstart
bash
skills-store morpho markets --chain base --order-by SupplyApy --direction Desc
skills-store morpho market 0xb323...86cc --chain-id 1
skills-store morpho vaults --chain ethereum --order-by NetApy --direction Desc
skills-store morpho vault 0xBEEF...F378 --chain-id 1
skills-store morpho positions 0xYourAddress --chain base
[Uniswap CLI Reference]
3 commands for swap quotes, swap execution, and token lookup on Uniswap V3.
Authentication
- : No auth needed.
- : Requires (reads on-chain QuoterV2 contract — no gas spent).
- : Requires (signs and broadcasts transaction).
Command Index
| # | Command | Auth | Description |
|---|
| 1 | skills-store uniswap quote --from <token> --to <token> --amount <n> [--chain <chain>] [--fee <bps>]
| Yes* | Get estimated swap output without executing |
| 2 | skills-store uniswap swap --from <token> --to <token> --amount <n> [--chain <chain>] [--fee <bps>] [--slippage <bps>]
| Yes | Execute on-chain swap |
| 3 | skills-store uniswap tokens [--chain <chain>]
| No | List well-known token symbols and addresses |
Supported chains: arbitrum (default), ethereum, polygon
Fee tiers: 100 (0.01%), 500 (0.05%), 3000 (0.3%), 10000 (1%)
Default slippage: 50 bps (0.5%)
Available Tokens
| Chain | Tokens |
|---|
| Arbitrum | WETH, USDC, USDC.e, USDT, wstETH, weETH, WBTC, ARB |
| Ethereum | WETH, USDC, USDT, wstETH, weETH, WBTC, DAI, sUSDe, USDe |
| Polygon | WETH, USDC, USDT, WMATIC, wstETH |
Key Concepts
- Fee Tiers: Correlated pairs (WETH/wstETH) use 100 bps; standard pairs (WETH/USDC) use 3000 bps.
- Slippage: Default 50 bps. For large/illiquid swaps, use or higher.
- ERC-20 Approval: First swap of a token requires approval (auto-handled, extra gas).
- Unknown token: Use contract address directly if symbol not in well-known list.
Quickstart
bash
skills-store uniswap tokens --chain arbitrum
skills-store uniswap quote --from WETH --to wstETH --amount 0.05
skills-store uniswap swap --from WETH --to wstETH --amount 0.05
skills-store uniswap swap --from USDC --to WETH --amount 100 --chain ethereum --fee 3000
[Hyperliquid CLI Reference]
11 commands for perpetual futures and spot trading on Hyperliquid.
Authentication
- Data commands (, , , , ): No auth needed.
- Trading commands (, , , , , ): Require in (signs EIP-712 typed data for Hyperliquid L1).
Command Index
| # | Command | Auth | Description |
|---|
| 1 | skills-store hyperliquid markets
| No | List perpetual markets (price, leverage, volume) |
| 2 | skills-store hyperliquid spot-markets
| No | List spot markets |
| 3 | skills-store hyperliquid price <symbol>
| No | Real-time mid price |
| 4 | skills-store hyperliquid orderbook <symbol>
| No | L2 order book snapshot |
| 5 | skills-store hyperliquid funding <symbol>
| No | Current and historical funding rates |
| 6 | skills-store hyperliquid buy --symbol <s> --size <n> --price <p> [--leverage <l>]
| Yes | Buy / open long |
| 7 | skills-store hyperliquid sell --symbol <s> --size <n> --price <p>
| Yes | Sell / open short |
| 8 | skills-store hyperliquid cancel --symbol <s> --order-id <oid>
| Yes | Cancel an open order |
| 9 | skills-store hyperliquid positions
| Yes | View perpetual positions |
| 10 | skills-store hyperliquid balances
| Yes | View USDC margin and spot balances |
| 11 | skills-store hyperliquid orders [--symbol <s>]
| Yes | List open orders |
Key Concepts
- Funding Rate: Hourly payment between longs/shorts. Positive = longs pay shorts.
- Cross Margin: All positions share the same USDC margin pool.
- szDecimals: Each asset has required size precision (e.g. BTC = 5 decimal places). Use to check.
- Liquidation Price: Monitor closely — cross margin means losses in one position affect all others.
Quickstart
bash
skills-store hyperliquid markets
skills-store hyperliquid funding BTC
skills-store hyperliquid price BTC
skills-store hyperliquid buy --symbol BTC --size 0.01 --price 65000 --leverage 10
skills-store hyperliquid positions
skills-store hyperliquid sell --symbol BTC --size 0.01 --price 66000
[Ethena CLI Reference]
5 commands for sUSDe yield-bearing stablecoin on Ethereum mainnet.
Authentication
- , : No auth needed.
- , , : Require in (Ethereum mainnet, ETH for gas).
Command Index
| # | Command | Auth | Description |
|---|
| 1 | | No | sUSDe exchange rate, total assets, cooldown duration |
| 2 | skills-store ethena balance <address>
| No | USDe and sUSDe balances for a wallet |
| 3 | skills-store ethena stake --amount <n>
| Yes | Deposit USDe → receive sUSDe shares |
| 4 | skills-store ethena cooldown --amount <n>
| Yes | Initiate 7-day unstake cooldown (amount in USDe terms) |
| 5 | skills-store ethena unstake
| Yes | Withdraw USDe after cooldown completes |
Key Concepts
- Exchange Rate: 1 sUSDe = X USDe (grows over time as yield accrues).
- Cooldown Period: 7 days. Must call first, wait 7 days, then call .
- Yield Source: Ethena delta-neutral strategy (spot ETH + short perp) distributes funding income to sUSDe holders. APY ~8–15% historically.
- sUSDe on L2: Can buy sUSDe on L2 DEXes (cheaper gas), but staking/unstaking only on Ethereum mainnet.
Quickstart
bash
skills-store ethena apy
skills-store ethena balance 0xYourAddress
skills-store ethena stake --amount 1000
skills-store ethena cooldown --amount 500
skills-store ethena unstake
[Polymarket CLI Reference]
12 commands for prediction market search, pricing, and trading on Polygon.
Authentication
- Data commands (, , , , , ): No auth needed.
- Trading commands (, , , , , ): Require in (Polygon wallet). API credentials auto-derived and cached at
~/.skills-store/polymarket_creds.json
Command Index
| # | Command | Auth | Description |
|---|
| 1 | skills-store polymarket search <query> [--limit <n>]
| No | Search prediction markets |
| 2 | skills-store polymarket markets [--tag <tag>] [--sort <sort>] [--limit <n>]
| No | List popular/active markets |
| 3 | skills-store polymarket event <event_id>
| No | Get event details with related markets |
| 4 | skills-store polymarket price <token_id>
| No | Get Yes/No price, midpoint, spread |
| 5 | skills-store polymarket book <token_id>
| No | View orderbook depth |
| 6 | skills-store polymarket history <token_id> [--interval <1m|1h|1d|1w>]
| No | Price history |
| 7 | skills-store polymarket buy --token <id> --amount <usdc> --price <0-1>
| Yes | Buy outcome shares |
| 8 | skills-store polymarket sell --token <id> --amount <shares> --price <0-1>
| Yes | Sell outcome shares |
| 9 | skills-store polymarket cancel <order_id>
| Yes | Cancel an open order |
| 10 | skills-store polymarket orders [--market <id>]
| Yes | View open orders |
| 11 | skills-store polymarket positions
| Yes | View current positions |
| 12 | skills-store polymarket balance
| Yes | View USDC balance |
Key Concepts
- Prices are probabilities: Price 0.65 = 65% implied probability. Win pays $1.00 per share.
- Two token IDs per market: = Yes, = No.
- CLOB model: Central limit order book — orders may not fill immediately.
- USDC on Polygon: All trading uses USDC on Polygon network.
Quickstart
bash
skills-store polymarket markets --sort volume --limit 10
skills-store polymarket search "bitcoin"
skills-store polymarket price <token_id>
skills-store polymarket buy --token <token_id> --amount 100 --price 0.65
skills-store polymarket positions
[Kalshi CLI Reference]
12 commands for US-regulated prediction market trading across demo and production environments.
Authentication
- Data commands (, , , , , ): No auth needed.
- Trading commands (, , , , , ): Require Kalshi RSA API credentials:
bash
KALSHI_KEY_ID=your-key-id
KALSHI_PRIVATE_KEY_PEM=/path/to/private_key.pem
Important: Default environment is
(paper trading). Use
for real trades. KYC required for production (US residents only).
Command Index
| # | Command | Auth | Description |
|---|
| 1 | skills-store kalshi [--env demo|prod] search <query>
| No | Search events and markets |
| 2 | skills-store kalshi [--env demo|prod] markets [--sort <sort>] [--limit <n>]
| No | List popular/active markets |
| 3 | skills-store kalshi [--env demo|prod] event <event_ticker>
| No | Get event with related markets |
| 4 | skills-store kalshi [--env demo|prod] price <ticker>
| No | Get Yes/No price and probability |
| 5 | skills-store kalshi [--env demo|prod] book <ticker>
| No | View orderbook depth |
| 6 | skills-store kalshi [--env demo|prod] history <ticker> [--interval <1m|1h|1d|1w>]
| No | Price history |
| 7 | skills-store kalshi [--env demo|prod] buy --ticker <t> --side <yes|no> --count <n> --price <0-1>
| Yes | Buy outcome contracts |
| 8 | skills-store kalshi [--env demo|prod] sell --ticker <t> --side <yes|no> --count <n> --price <0-1>
| Yes | Sell outcome contracts |
| 9 | skills-store kalshi [--env demo|prod] cancel <order_id>
| Yes | Cancel an open order |
| 10 | skills-store kalshi [--env demo|prod] orders [--ticker <t>]
| Yes | View open orders |
| 11 | skills-store kalshi [--env demo|prod] positions
| Yes | View current positions |
| 12 | skills-store kalshi [--env demo|prod] balance
| Yes | View USD account balance |
Key Concepts
- Prices in cents: Price 65 = 65% probability. Buy Yes at 65 cents → pay $0.65/contract, win $1.00 if Yes.
- Count vs Amount: Specify (number of contracts), not a USD amount. Each contract = $1 face value.
- Demo first: Always test with before using .
- Kalshi vs Polymarket: Kalshi = US licensed, KYC required, USD. Polymarket = decentralized, no KYC, USDC on Polygon.
Quickstart
bash
skills-store kalshi markets
skills-store kalshi search "fed rate"
skills-store kalshi price FED-24DEC-T5.25
skills-store kalshi buy --ticker FED-24DEC-T5.25 --side yes --count 10 --price 0.65
skills-store kalshi --env prod buy --ticker FED-24DEC-T5.25 --side yes --count 10 --price 0.65