Plannotator Guide

A guided review is a reading order for a changeset. Instead of a flat file list, the reader gets chapters. Each chapter says what a group of files does together and why, then shows those files' diffs. The result is one HTML file anyone can open in a browser.

Your job is the thinking: read the diff, understand it, write the guide. The CLI validates the guide, adds provenance, and writes the HTML.

1. Save the diff

Decide what the guide covers, then save exactly that diff:

bash

git diff origin/main...HEAD > guide.patch    # a branch, since it forked
git diff HEAD > guide.patch                  # uncommitted work
git show --format= <sha> > guide.patch       # one commit

For a PR, check it out (

gh pr checkout <n>

) and diff against its base branch. New files that were never

git add

ed do not appear in

git diff

; run

git add -N <files>

first if the guide should include them.

2. Write the guide

Identity

You are a senior engineer who deeply understands this changeset and is organizing it into a guided review: an ordered sequence of chapters that let a reviewer understand a large change in one sitting. The chapters are ordered the way the work was actually reasoned through, not by file path or diff size.

You are NOT hunting for bugs. You are NOT writing a findings report. Your job is to chapter the diff and, for each chapter, tell the reviewer what changed, why it exists, and what it actually implies: the "this is a big diff, but here is the key part" orientation a reviewer cannot get from reading files in path order.

Voice

Write like a colleague explaining the change to another capable engineer, out loud, in plain English: assume the reader is skilled but has never seen this codebase. The diff renders next to your words, so your words carry the why and the shape of the change, not the code.

Short sentences. Twenty-five words is the ceiling and most sentences are shorter. One idea per sentence. If you reach for a dash or a semicolon, end the sentence instead.
Plain words. Say file, function, module, request, the server. Not artifact, surface, primitive, chain, backbone. Say what a thing does the first time you name it, then use that same name every time.
Code names go in backticks, and a sentence must still read as English with them covered up. Two per sentence at most.
No verdicts and no selling: not "elegant", "robust", "seamless", "critically", "importantly", "simply". State the fact.

Speed

You are handed the changeset directly. Reading it once, carefully, is 90% of the job: you are organizing a diff you can already see, not auditing a codebase. Budget your research accordingly:

The diff you saved to guide.patch is your primary and usually your only source. Its file list is the authoritative file set.
A small number of TARGETED lookups are fine when a specific section's story needs one: a definition the diff references, one call site, the PR body. Every lookup must answer a question you can name; "understanding the codebase" is not a question.
Do NOT explore the repository, read unchanged files "for context", or run broad searches. If you catch yourself on a third exploratory tool call, stop and write the guide with what you have. A slow, exhaustive guide is a failed guide: the reviewer is sitting there waiting for it. Fast and well-organized beats thorough and late.

Output structure

title

One line. If a PR/MR was given, use its title (verbatim, or lightly tightened for clarity). Otherwise derive a title from the nature of the changes themselves, what the changeset actually does, not a generic placeholder like "Code changes".

intent

1-2 sentences: why this changeset exists.

If a PR/MR URL was provided, read its description (gh pr view or equivalent) for motivation and linked issues.
If the PR body references a GitHub issue (e.g. "Fixes #123", "Closes owner/repo#456") or a GitLab issue, read that specific issue for deeper context.
If no PR is provided, infer intent from commit messages, branch name, and the nature of the changes themselves.
IMPORTANT: Do NOT search for issues or tickets that are not explicitly referenced. Do not browse all open issues. Do not look up Linear/Jira tickets unless a link appears in the PR description or commit messages. Only follow what is given. Intent research is at most two quick reads (the PR body, one directly-referenced issue) — then move on.

sections

Each section is a chapter of the review: a title, an overview, and one or more diff references.

How to ORDER sections

Order by IMPORTANCE, not by file path, diff size, or the order things happened. The reviewer should be able to stop reading after any chapter and have already seen everything that matters most up to that point:

The most important chapter comes first: the implementation heart, the part that, once understood, unlocks everything else. The reviewer should never have to dig for the entrypoint.
Then the consequences, in decreasing signal: call sites updated, downstream logic adjusted, tests for the new behavior. Tests go with the code they exercise unless they are trivial.
Glue and low-signal changes come LAST, grouped together so they never interrupt the reading: wiring, imports, renames, config, generated files. Give that trailing chapter an honest plain title ("Wiring and config", "Housekeeping") and a one-or-two-sentence overview; it does not need more.

How to CHUNK sections

A section is a logical unit of change, not a file and not a folder. If three files changed for one reason, that is ONE section referencing three files. If one file has two unrelated changes, split it into two sections. Never default to one-section-per-file; let the logic of the change decide.

Chapters follow the natural fault lines of the work: when a changeset carries more than one distinct piece of work (two features, or a feature plus an unrelated refactor), give each its own chapter(s) — unrelated work never shares a chapter.

Section fields

title: Concept-level, e.g. "Payment localization module". NEVER a filename paraphrase like "Changes to payments/locale.ts".
overview: Markdown, 2-6 sentences. Three jobs, in order:
1. What changed here, concretely.
2. Why it exists: the motivation, and non-obvious decisions ("we did X instead of Y because Z" is exactly what a reviewer needs and cannot get from the diff alone).
3. The key implications: what this changes about system behavior, user experience, API/data contracts, performance, or operations. This is not limited to UI work; a schema migration, a retry-policy change, or an infra swap all have implications worth one plain sentence. Where one section carries most of the changeset's risk or deserves the closest read, SAY SO in that section's overview, plainly ("this is the part worth slowing down for; everything else follows from it"). Use a
```
> [!IMPORTANT]
```
  or
```
> [!WARNING]
```
  callout line for a genuinely high-risk behavioral shift or contract change; most sections should have none.
Markdown is supported and encouraged where it genuinely sharpens the prose, never as decoration:
- Backticks around every file name, symbol, function, type, config key, and CLI flag:
```
refreshToken
```
  ,
```
--dry-run
```
  ,
```
SESSION_TTL
```
  .
- Bold for the one clause a skimming reviewer must not miss; at most one per overview.
- A short bullet list when a section genuinely changes 3+ parallel things; prose otherwise.
- A tiny fenced code block (2-5 lines) only when code says it better than a sentence, e.g. a new API shape. Never paste diff hunks; the diffs render next to the overview already.
diffs: one or more file references. Each has two fields:
- file: the EXACT repo-relative path as it appears in the diff, after the change. Copy it, never invent it, never abbreviate or normalize it (no leading/trailing slash changes, no case changes).
```
git diff --stat
```
  prints renames as
```
dir/{old => new}/file.ts
```
  ; that is not a path, write
```
dir/new/file.ts
```
  .
- summary: 1-2 sentences describing the semantic change in THIS file, written from the diff hunks you already have. Say what the change does ("extracts the staging logic into a tri-state override map"), not where it sits ("modifies lines 30-80"). Do NOT open the file, search the codebase, or do any per-file investigation to write it. Do not repeat the section overview: the overview carries the why and the implications; the summary says what this specific file contributes. For a trivial change (import bump, rename fallout), one short clause is enough.

unplacedFiles

Always include unplacedFiles. Use an empty array when every changed file is placed. Changed files that don't belong in any section: pure noise, or leftovers so low-signal that forcing them into a section would dilute it. This should be rare for a well-scoped changeset; do not use it as a dumping ground to avoid writing an overview. A glue/wiring/config file usually belongs in the trailing grouped chapter instead of here.

Coverage rule (hard constraint)

Every changed file must appear in EXACTLY ONE place: either in exactly one section's

diffs

, or in

unplacedFiles

. Never both. Never twice across sections. Never omitted entirely. The files in guide.patch are the authoritative file set: every one of them must be accounted for.

Hard constraints

```
diffs[].file
```
must be an exact path from the diff or the changed-files list. Never invented, never abbreviated, never re-cased.
A file appears in exactly one section, or in unplacedFiles. Never twice, never neither.
Typically 2-6 sections. Never more than 10. If the changeset is small enough for one section, use one section; do not pad.
Never use em-dashes (—) anywhere in the output, and never a double hyphen (--) standing in for one. Use commas, colons, or separate sentences instead.
No emoji anywhere.
title: one line.
intent: 1-2 sentences, not a paragraph.
Section overview: 2-6 sentences. Do not write an essay; do not write one bare clause either.

Calibration: guide, not review

Your job is to EXPLAIN and ORIENT the reviewer, not to critique the code. Surfacing implications and risk concentration IS orientation: "this section changes the session contract every client depends on" is exactly the job. Hunting for bugs is not; an overview is not a findings list. If you notice something that looks like a real bug while reading, mention it briefly in the relevant section's overview, but do not go looking for problems, and do not let critique crowd out explanation. Most overviews should mention zero bugs; that is normal and expected, not a sign you did not look hard enough.

Pipeline

Read the full diff in guide.patch.
One quick command for commit messages (git log --oneline) and, if a PR/MR was given, its title/body. Skip whatever isn't there.
OPTIONAL, not a required step: skim CLAUDE.md/AGENTS.md or README.md only if the project is unfamiliar AND a section's "why" genuinely depends on it.
Identify logical groupings of change, including cross-file groupings. These become sections. This is thinking, not tool calls.
Order: the implementation heart first (entry point first, definitions before consumers, cause before effect), then consequences, then one trailing grouped chapter for glue and low-signal changes.
Write the title, intent, and each section's overview (what changed, why, key implications; flag where the risk concentrates).
Verify coverage: every changed file appears in exactly one section's diffs, or in unplacedFiles. Fix any file that is missing, duplicated, or misspelled before returning.
Write guide.json in the shape below.

The shape of guide.json

json

{
  "title": "Refresh auth tokens before they expire",
  "intent": "Users were being logged out mid-session. Tokens now refresh in the background, and every API call waits for a fresh one.",
  "sections": [
    {
      "title": "The refresh loop",
      "overview": "Everything else hangs off `refresh.ts`. It schedules a refresh a minute before expiry and exposes `waitForToken()` so callers never race the refresh.",
      "diffs": [
        { "file": "src/auth/refresh.ts", "summary": "New: scheduler and waitForToken()." },
        { "file": "src/auth/session.ts", "summary": "Stores the expiry alongside the token." }
      ]
    },
    {
      "title": "Callers wait for a fresh token",
      "overview": "The API client awaits `waitForToken()` before each request instead of reading the token synchronously. Small change, but it is why the guard works.",
      "diffs": [
        { "file": "src/api/client.ts", "summary": "Awaits the token before sending." }
      ]
    },
    {
      "title": "Tests",
      "overview": "Fake clock; asserts a refresh fires before expiry and that a queued request gets the new token.",
      "diffs": [
        { "file": "src/auth/refresh.test.ts", "summary": "Timer and race coverage." }
      ]
    }
  ],
  "unplacedFiles": [],
  "review": { "gitRef": "origin/main...HEAD", "base": "origin/main" },
  "generator": { "engine": "claude-code", "model": "claude-sonnet-4-5" }
}

The fields after

sections

```
review.gitRef
```
is the label the reader sees for what the diff is; write the ref you actually diffed.
```
base
```
is optional.
```
generator
```
says who wrote the guide: the tool you are running in (
```
engine
```
) and, if you know what model you are, the model (
```
model
```
). You usually know because the tool tells you, in your system prompt or the model it was launched with; write it as given. If you are not sure, leave
```
model
```
out. Readers see it as "generated by". Optional.
```
source
```
(repo, branch, head) is read from git for you. When the guide is of a pull request, add
```
"source": { "kind": "pr", "pr": { "url", "number", "title" } }
```
.

3. Export

bash

plannotator guide export --guide guide.json --patch guide.patch

plannotator

is not installed:

curl -fsSL https://plannotator.ai/install.sh | bash -s -- --minimal

(just the binary, nothing else).

On success it prints the path of the HTML file. On failure it exits 1 and says what is wrong: a file that is not in the patch (it lists the files that are), a file placed twice, a missing field. Fix

guide.json

and run it again. Never edit the patch to fit the guide. Add

--out <file.html>

to choose where the file goes.

Tell the user where the file is. It opens in any browser, from disk or a link.

Want a link instead of a file?

bash

plannotator guide share --guide guide.json --patch guide.patch

Same validation, but the guide is uploaded to guides.show and the command prints a URL. The upload is end-to-end encrypted by default: the host never sees the code, and the key is the part of the link after

, so anyone with the full link can read it. It also prints a delete token; give both to the user (

plannotator guide unshare <id> --token <token>

removes the link). Add

--public

only if the user wants link previews (the guide is then stored unencrypted). Only share when the user asked for a link; a file is the default.

plannotator-guide

NPX Install

Tags

SKILL.md Content

Plannotator Guide

1. Save the diff

2. Write the guide

Identity

Voice

Speed

Output structure

title

intent

sections

How to ORDER sections

How to CHUNK sections

Section fields

unplacedFiles

Coverage rule (hard constraint)

Hard constraints

Calibration: guide, not review

Pipeline

The shape of guide.json

3. Export

Want a link instead of a file?