omni-gateway-install

Original：🇺🇸 English

Translated

Install and register MuleSoft Omni Gateway on self-managed infrastructure: Linux (Ubuntu/Debian via APT), Docker or Docker Compose, or Kubernetes / OpenShift (Helm). Use when the user wants to install Omni Gateway, connect it to Anypoint Platform's control plane, re-register after a token expires or a new environment is needed, and verify the gateway is running. CloudHub 2.0 managed deployments are not covered by this skill bundle.

3installs

Sourcemulesoft/mulesoft-dx

Added on2026-10-22

NPX Install

npx skill4agent add mulesoft/mulesoft-dx omni-gateway-install

SKILL.md Content

View Translation Comparison →

Install Omni Gateway

Choose Your Platform

Pick the target platform, then read the matching reference file for the full step-by-step walkthrough. Each reference covers both connected mode (registered with Anypoint Platform) and local mode (standalone).

mermaid

flowchart TD
    Start{Which platform?}

    Start -->|Linux Ubuntu/Debian| L[references/linux.md]
    Start -->|Docker or Docker Compose| D[references/docker.md]
    Start -->|Kubernetes or OpenShift| K[references/kubernetes.md]

Platform	Read	Covers
Linux (Ubuntu/Debian, APT)	`references/linux.md`	APT repo setup, `flex-gateway` package, systemd service
Docker / Docker Compose	`references/docker.md`	Image pull, `docker run` and Compose, conf.d bind mount
Kubernetes / OpenShift (Helm)	`references/kubernetes.md`	Helm repo, `values.yaml` , OpenShift SCC settings

RHEL, CentOS, and Amazon Linux are not covered by the APT instructions. Contact the MuleSoft gateway team for RPM repository details — do not use the APT repository on RPM-based systems.

After completing the platform walkthrough, return here for connected-mode verification and troubleshooting.

Connected mode vs. local mode

All three platforms support two modes; pick before you start:

Connected mode — the gateway registers with Anypoint Platform and appears in Runtime Manager. Requires an organization ID and a registration token (expires 24 hours after issue).
Local mode — the gateway runs standalone with no control-plane connection. Skip the registration step in the platform reference.

Each platform reference spells out which steps to skip for local mode.

Confirm in Anypoint Runtime Manager (connected mode)

After installation and registration, verify that the gateway is online.

Option 1: Anypoint Platform UI

Navigate to Anypoint Platform → Runtime Manager → Flex Gateways
Find your gateway by name
Confirm the status shows STARTED (green indicator)

Option 2: Flex Gateway Manager API

GET https://anypoint.mulesoft.com/flexgateway/api/v1/organizations/{orgID}/environments/{envID}/gateways/{gatewayID}
Authorization: Bearer <access-token>

Expect a 200 response with

"status": "STARTED"

.

Troubleshooting

Problem	Likely Cause	Fix
`authentication failed` or `401 Unauthorized`	Token expired or belongs to a different organization	Generate a fresh token from Runtime Manager → Add Gateway → Self-managed, then re-run registration
`environment not found` or `404`	Organization ID wrong or token scoped to a different organization	Verify org ID in Anypoint Admin Settings and regenerate token in the correct organization
`permission denied` or `conf.d not writable`	Output directory has restrictive permissions	Run `sudo chown -R $USER /usr/local/share/mulesoft/flex-gateway/conf.d` (Linux) or adjust volume permissions (Docker/Kubernetes)
`409 Conflict` — gateway already registered	A gateway with this name already exists in Anypoint	Use a different `<gateway-name>` or delete the old record from Runtime Manager
Status stays `DISCONNECTED` after restart	Registration file not in conf.d, or gateway using wrong conf.d path	Verify with `ls -la /usr/local/share/mulesoft/flex-gateway/conf.d/` ; for Docker/Kubernetes check volume mount path
`flexctl: command not found` (Linux)	`flexctl` is not in `$PATH`	Reinstall flex-gateway or add the installation directory to `$PATH`
Container exits immediately (Docker)	Missing or malformed `registration.yaml` , permissions mismatch on `conf.d/` , or port in use	Run `docker logs flex-gateway` to see the error
`bind: address already in use`	Another process is listening on the mapped port	Change the host-side port (e.g., `-p 18081:8081` ) or stop the conflicting process
`ImagePullBackOff` (Kubernetes)	Node cannot reach Docker Hub or image tag does not exist	Check network egress rules; confirm tag with `docker pull mulesoft/flex-gateway:<tag>`
`CrashLoopBackOff` (Kubernetes)	Missing registration secret, malformed ConfigMap YAML, or OpenShift SCC violation	Run `kubectl logs -n gateway deployment/ingress`
`Pending` pods (Kubernetes)	Resource quota or node affinity issues	Run `kubectl describe pod -n gateway`

Next Steps After Installation

Once the gateway is installed and running:

Apply a policy to an API — configure API proxying and security: see
```
secure-api
```
.
Monitor logs — parse and interpret gateway log output: see
```
omni-gateway-logs
```
.
Validate your conf.d configuration — check YAML resource files for misconfigurations before deploying changes: see
```
omni-gateway-config
```
.

Related Jobs

```
omni-gateway-config
```
— Validate conf.d YAML configuration
```
omni-gateway-logs
```
— Parse and interpret gateway log output
```
omni-gateway-diagnose
```
— End-to-end triage when the gateway returns errors