Loading...
Loading...
Found 12 Skills
Authenticate to the Sumsub API with an App Token + secret key (HMAC-SHA256 request signing). TRIGGER when the user asks to "call / sign / authenticate Sumsub API requests", debugs `401 Unauthorized` / signature errors against `api.sumsub.com`, or needs a working request example with `X-App-Token` / `X-App-Access-Sig` / `X-App-Access-Ts` headers. SKIP only when a more specific skill in this repo (questionnaire/level/workflow/POA-preset/generic) already covers the user's actual task — those skills sign requests the same way and only need this one for auth deep dives.
Catch-all fallback for any Sumsub API task that does NOT match a more specific skill (e.g. `create-sumsub-level`, `sumsub-create-questionnaire`, `sumsub-api-auth`). TRIGGER when the user wants to call, inspect, or debug a Sumsub API endpoint not otherwise covered — fetching applicants, listing levels, reviewing AML hits, exporting data, generating SDK tokens, anything against `api.sumsub.com`. The procedure — locate the right endpoint in the OpenAPI schema, read its request/response shape, build the payload, sign with App Token, and validate. SKIP whenever a narrower Sumsub skill already covers the request.
Create or update a Sumsub applicant level. POST `/resources/applicants/-/levels` to create new, PATCH same path to update (id in body), GET `/resources/applicants/-/levels/{id}` to read one back. TRIGGER when the user asks to "create / add / build / update / edit a Sumsub level", supplies a list of required steps for an applicant flow (identity / selfie / proof-of-residence / questionnaire / payment methods / email or phone verification / KYB / e-sign), or wants a level wired to a specific questionnaireDefId. SKIP for other Sumsub entities (questionnaires, workflows, applicants) or for one-off subsetting tweaks not covered by the compact spec (use `sumsub-api-generic` for those).
End-to-end recipe for adding Sumsub KYC to a website or web app via the Sumsub WebSDK. TRIGGER when the user asks to "integrate / embed / add Sumsub", "show the KYC widget", "add WebSDK", "verify users with Sumsub on the frontend", supplies an existing levelName they want to plug into a page, or asks how to wire up access tokens / lifecycle events / webhooks for Sumsub verification in an arbitrary project. Covers the whole loop — level setup, server-side access-token signing, snsWebSdk init (vanilla canonical, React recipe), client lifecycle events, token refresh, source-of-truth via webhooks + applicant GET, sandbox testing, go-live checklist. SKIP for building the level/questionnaire/POA-preset payload itself (use the sibling skills), or for backend-only API calls with no frontend (use `sumsub-api-generic`).
Register the crypto wallet addresses an organisation controls, so Sumsub can resolve address ownership without a human. Bulk-imports addresses into the Wallet Address Book via `POST /resources/kyt/walletAddress/import`, and registers a single address against a specific applicant via `POST /resources/api/applicants/{applicantId}/payments`. TRIGGER when the user asks to "upload / import / register our wallet addresses", "add addresses to the Wallet Address Book", "register a user's crypto wallet as a payment method", says Travel Rule requests are "not matching automatically" or "always land in manual review", or asks how to stop confirming the same address by hand on every exchange. SKIP for looking up which VASP owns a *counterparty* address (that is attribution — use `sumsub-api-generic` against `/resources/api/wallet-attribution`), for confirming ownership on one specific transaction (use `sumsub-integrate-travel-rule`), and for deleting addresses (no public endpoint — use the dashboard).
Integrate the Sumsub Mobile SDK (IdensicMobileSDK / SNSMobileSDK) into an iOS app — even when the user doesn't name the SDK (e.g. "add Sumsub/KYC to my iPhone app", "show the verification screen on iOS", "launch Sumsub from a view controller"). Covers install, permissions, init, token refresh, presenting the flow. SKIP for web (`sumsub-integrate-websdk`), backend / API-only token signing (`sumsub-api-generic`), theming (`sumsub-theme-msdk`), and non-iOS — Android / React Native / Flutter (not supported). iOS only.
Create or update a Sumsub cross-check preset (name/address comparison rules between POI and POA documents) via `POST/PATCH /resources/api/agent/crossCheckPresets` and `GET /resources/api/agent/crossCheckPresets/{id}`. TRIGGER **ONLY** when the user EXPLICITLY asks to override how cross-checks compare names or addresses — e.g. "switch name match to strict", "allow fuzzy address match", "ignore middle-name mismatch", "create a custom cross-check preset". SKIP by default — Sumsub ships sensible defaults tuned for the best conversion and approval rate, so most clients should NOT create a custom preset. SKIP for level creation (the default cross-check preset auto-applies to every level), for general KYC config, or any request that doesn't specifically name "cross-check rules", "name comparison", or "address comparison".
Configure KYT transaction monitoring rules with tags, applicant risk scoring and risk levels. TRIGGER when the user says "create / add / set up KYT rules / TM rules", "configure transaction monitoring", describes scoring logic (flag/block/hold transactions by amount, country, direction, peer, or other conditions), wants to "update / change / edit an existing rule" (by name or title), asks to "configure applicant scoring / risk scoring / assessment", "set up tags", "define risk levels / thresholds", or "configure applicant risk". SKIP for applicant levels, questionnaires, PoA presets, workflows, or non-TM tasks.
Create or update a Sumsub KYC questionnaire definition. POST `/resources/api/agent/questionnaires` to create new (fails 409 if id exists), PATCH same path to update (fails 404 if id is unknown), GET `/resources/api/agent/questionnaires/{id}` to read one back. TRIGGER when the user asks to "create / add / build / update / edit a Sumsub questionnaire", or supplies a list of questions / sections meant for a Sumsub applicant flow, or references a questionnaire id / definition to be POSTed or PATCHed. SKIP for other Sumsub entities (levels, workflows, applicants), questionnaire data (answers) submission, or non-Sumsub form builders.
Add, replace, or remove tags on a Sumsub applicant profile via the public API — `POST /resources/applicants/{applicantId}/tags/add` (additive), `POST .../tags` (overwrite the full set), `DELETE .../tags` (remove), read-back via `GET .../one`. TRIGGER when the user asks to "tag / untag an applicant", "add / remove / clear applicant tags", "label an applicant profile", or "replace an applicant's tag set". SKIP for transaction tags, tag definitions with scoring weights, or applicant risk assessment (use `sumsub-create-kyt-rules`), for automated tagging inside verification workflows (use `sumsub-create-workflow`), and for subscribing to tag-change webhooks (use `sumsub-manage-webhooks`).
Query AND edit Sumsub's supported identity documents. READ the built-in catalogue (documentsByCountries) — which document types are supported per country, whether they're double-sided, which OCR fields are default vs. available. EDIT a client's own supported-document overrides (idDocSettings.countryMappings) via the global-settings API. TRIGGER when the user asks "which countries / document types support field X", "what fields can I collect for a passport in DEU", "is the ID card double-sided in France", OR wants to change supported documents / toggle a document type / edit collected fields for a country. SKIP for creating levels or questionnaires (use the dedicated skills).
Discover the Databases (check-sources) Sumsub offers for a country, whether each is enabled for the tenant, and how database / non-document (eKYC) verification fits into a verification level. Use WHEN a user asks which database / non-document check-sources are available for a country, whether they're enabled, or how to add database validation / non-doc identity / non-doc address verification to a level. Also called by sumsub-create-level before placing those sources. Do NOT use for document-only verification or entitlement checks (use sumsub-check-permissions).