Loading...
Loading...
Found 7 Skills
OpenOCD skill for embedded hardware debugging. Use when configuring OpenOCD for JTAG or SWD targets, flashing firmware, connecting GDB to bare-metal targets, setting hardware watchpoints, or using J-Link with OpenOCD. Activates on queries about OpenOCD, JTAG, SWD, GDB remote target, flash programming, hardware breakpoints, J-Link, or connecting GDB to an MCU.
OpenOCD 下载与调试工具，用于探针探测、固件烧录、Flash 擦除、GDB Server 启动、目标复位控制、 Telnet 在线调试（halt/resume/step/寄存器/内存/断点）、GDB 源码级调试，以及 Semihosting/ITM 输出捕获和底层查询。 当用户提到 OpenOCD、ST-Link、CMSIS-DAP、DAPLink、FTDI、烧录固件、擦除 Flash、GDB Server、 reset、interface/target/board 配置、openocd.cfg、在线调试、单步、断点、寄存器查看、 内存读写、semihosting 时自动触发，也兼容 /openocd 显式调用。 即使用户只是说"烧录一下"、"启动 GDB Server"、"擦除芯片"、"看看寄存器"、"单步调试" 或"抓一下 semihosting"，只要上下文涉及 OpenOCD 支持的开源调试器就应触发此 skill。
This is used when you need to start or attach a GDB session via OpenOCD, and call the built-in scripts to complete firmware download, online debugging, or crash scene inspection.
Used when you need to call the built-in script to flash embedded firmware via OpenOCD using detected or explicitly specified artifact and probe configurations.
FreeRTOS skill for embedded RTOS development. Use when creating tasks, managing priorities, using queues and mutexes, detecting stack overflows, configuring FreeRTOS via FreeRTOSConfig.h, or debugging FreeRTOS applications with OpenOCD and GDB. Activates on queries about FreeRTOS tasks, queues, semaphores, mutexes, configASSERT, stack overflow, vTaskDelay, or FreeRTOS-aware debugging.
Used when you need to flash firmware to ESP32 series chips via the ESP-IDF toolchain or start a debugging session.
Used when you need to identify the correct serial port, call the built-in script to capture logs, and analyze the running status of embedded firmware.