Loading...
Loading...
Found 10 Skills
Senior embedded software engineer specializing in firmware and driver development for ARM Cortex-M microcontrollers (Teensy, STM32, nRF52, SAMD). Decades of experience writing reliable, optimized, and maintainable embedded code with deep expertise in memory barriers, DMA/cache coherency, interrupt-driven I/O, and peripheral drivers.
Bare-metal startup skill for reset-to-main bring-up. Use when writing startup code, vector tables, .data/.bss init, stack setup, or crt0 for Cortex-M/RISC-V. Activates on queries about reset vector, VTOR, startup.s, bss init, or bare-metal entry point.
Embedded bootloader skill for firmware update and app handoff. Use when writing a custom bootloader, jumping to application code, relocating VTOR, or implementing DFU/USB firmware update on Cortex-M. Activates on queries about bootloader jump, vector table relocation, application entry point, STM32 DFU, or dual-bank flash.
Bare-metal interrupt and exception skill for Cortex-M NVIC. Use when writing ISRs, configuring priorities, handling HardFault, or measuring interrupt latency. Activates on queries about NVIC, ISR, vector table, HardFault, tail-chaining, or interrupt priority.
Specialist in bare-metal and RTOS firmware - ESP32/ESP-IDF, PlatformIO, Arduino, ARM Cortex-M, STM32 HAL/LL, Nordic nRF5/nRF Connect SDK, FreeRTOS, Zephyr
Use when developing embedded/no_std Rust. Keywords: embedded, no_std, microcontroller, MCU, ARM, RISC-V, bare metal, firmware, HAL, PAC, RTIC, embassy, interrupt, DMA, peripheral, GPIO, SPI, I2C, UART, embedded-hal, cortex-m, esp32, stm32, nrf, 嵌入式, 单片机, 固件, 裸机
Embedded Rust skill for bare-metal microcontroller development. Use when using probe-rs or cargo-embed for flashing and debugging, setting up defmt logging, using the RTIC framework, configuring cortex-m-rt startup, writing no_std + no_main firmware, or choosing between panic-halt and panic-semihosting. Activates on queries about embedded Rust, probe-rs, cargo-embed, defmt, RTIC, cortex-m-rt, no_std embedded, or panic handling in embedded Rust.
Used when you need to start or attach a GDB session via J-Link GDB Server to complete firmware download, online debugging, or crash site inspection.
Bare-metal DMA skill for memory-peripheral transfers. Use when configuring DMA channels, circular mode, double buffering, or DMA IRQ completion. Activates on queries about DMA bare-metal, circular buffer, memory-to-peripheral, or DMA stream configuration.
Low-power embedded skill for sleep modes and energy optimization. Use when configuring MCU sleep/stop/standby, peripheral clock gating, wake-up sources, or measuring firmware current draw. Activates on queries about WFI, STOP mode, STM32 PWR, nRF sleep, wake-up EXTI, or reducing embedded power consumption.